Ingraphic:Aluminium Windows and Doors Maintenance Tips

You will need to clean your aluminium windows and doors twice a year using gentle methods, such as a soft brush, to avoid damage. Additionally, you can also check hinges, locks and other mechanical parts regularly if needed so that they can be replaced on time. Here are some tips:

1.Cleaning Tips

Generally, you need to clean it 2-3 times a year, using gentle tools such as a soft cloth, warm water, etc. With detergents, plain soapy water is fine. After scrubbing, you can use a soft cloth to dry it so that it won’t leave water stains. A mixture of warm water and a little white vinegar can wipe away stubborn grease stains.

2.Lubrication of Moving Parts

Mainly for the hinges, locks, handles and slides of the lubrication, this can not be too high frequency, 1-2 times can be, to ensure that the switch can be smooth.

3. Inspecting for Damage

Exterior frames, glass, handles and other hardware are checked for scratches and looseness.

The internal seals should not be ignored, which have an impact on the thermal and acoustic insulation.

You can put your hand close to the window frame and glass to feel if there is any noticeable heat or cold air. It will be obvious in summer or winter. If there is, it may be the sealing strip or glass insulation performance decline.

If the noise is not reduced after the window is closed, the seal or glass may need to be replaced.

4. Preventing Corrosion

The best way to prevent corrosion is to avoid prolonged exposure to water and chemicals, but rain is unavoidable. So keep drainage clear and regularly clean debris out of the slides.

5. Maintaining Sliding Tracks

You can use a hoover or brush to remove dust and debris from the slides, and wipe the slides with a damp cloth.

Wipe clean and apply a thin layer of lubricant to ensure smooth sliding for a long time.

6. Glass Care

It is best to use a professional glass cleaning cloth or microfibre cloth. Try not to use newspaper as this may leave ink marks on your glass.

The order of cleaning also has certain requirements:

Clean the window frame first, then the glass, to prevent dust on the frame from staining the cleaned glass.

Cleaning glass in direct sunlight may cause the cleaning solution to evaporate quickly, leaving water marks. It is better to clean on cloudy days or in the morning and evening.

7. Weatherproofing Tips

There are 3 main things to keep in mind when waterproofing:

① Check whether the sealant between the glass and the window frame is peeling, cracking or aging, and reapply the waterproof sealant if necessary.

②Regularly check whether the drainage holes are blocked by mud, sand, gravel and debris. If there is, you need to clean it, you can use a small brush or wire to clean it.

③ Check whether the sealing strip is damaged, if so it needs to be replaced.